Side by Side IPsec configurations for VNS3

Connect 2 VNS3 devices using IPsec

Connect 2 or more VNS3 Controller Instances via IPsec
In VNS3 v4.x you can now configure connections as either NAT-T or Native IPsec. Add a tunnel between 2 VNS3 Controllers using either NAT-T or Native IPsec.
Be sure your VNS3 Controllers are not in overlapping subnets or VLANs.

Watch the video on YouTube:

See the specific instructions for your cloud setup and instance launch on our Product Resources page

By: Margaret Valtierra